IOS: %EARL_L3_ASIC-SP-3-INTR_WARN: EARL L3 ASIC: Non-fatal interrupt Packet Parser block interrupt

Dec 18 09:54:43.989 JST: %EARL_L3_ASIC-SP-STDBY-3-INTR_WARN: EARL L3 ASIC: Non-fatal interrupt Packet Parser block interrupt
Dec 18 09:54:43.993 JST: %EARL_L3_ASIC-SP-3-INTR_WARN: EARL L3 ASIC: Non-fatal interrupt Packet Parser block interrupt

Description
These messages are indicating that the switch has received an invalid packet which contained a Layer 3 IP checksum error. These packets are normally being dropped silently within older IOS. In some IOS releases, the switch informs of this condition to warn users that there is (are) devices outside sending IP packets with checksum errors and/or with wrong length.

See CSCdz10360 (Need a CLI to be able to disable L3 error checking in HW) regarding this enhancement.

Workaround
These messages are purely informational. You may either:

1. SPAN all the Vlans and look at layer3 IP source address then remove the device generating invalid packets (unfortunately the switch doesn't track the IP address. The only way is to sniff every suspected Vlan to find out where those invalid packets are coming from).



2. Configure (this is a new config option added by means of CSCdz10360):
   no mls verify ip checksum ---> to stop to check for packet checksum errors
   no mls verify ip length ---> to stop to check for packet length errors
   no mls verify ip length minimum ---> to eliminate check for IP packets that are minimum length.
   no mls verify ip same-address ---> to stop checking for packet having equal source and destination IP address.



3. Do nothing as these are pure informational.